Product Description
NOCO Genius G7200 12V/24V 7200mA Fully Automatic Battery Charger and Maintainer (Grey): Automotive. Automatically shuts off if charger remains in bulk charge mode for an extended period of time. Charge and maintain virtually any vehicle battery with the NOCO G7200. This powerful, fully automatic charger is best suited for charging 12V and 24V batteries, from 14Ah to 230Ah, including batteries for cars, trucks, boats, RVs, motorcycles, ATVs, jet skis, and snowmobiles. In particular, the G7200 offers specialized charging modes for recovering severely drained batteries that will not accept a normal charge. The G7200 uses a thorough 12-step process to charge and maintain your battery and features a switch-mode design, resulting in a charger that's small and lightweight. Rapid Charging Technology enables the G7200 to charge batteries two times faster than traditional chargers. The NOCO G7200 battery charger and maintainer comes with battery clamp connectors and eyelet terminal connectors (view larger) Keep Your Batteries Charged and Maintained With the NOCO G7200, you can restore batteries to their original capacity, recover slightly sulfated batteries, charge batteries in cold climates, rescue drained batteries, and give your battery maintenance charges. As a result, you can extend the life of your battery and improve its capacity. Different modes allow you to charge large batteries for cars, trucks, boats, and RVs as well as small batteries found in motorcycles, ATVs, jet skis, and snowmobiles. Advanced 12-Step Charging Process The NOCO G7200 uses a 12-step process to charge and maintain your battery. First, it checks your battery's voltage to make sure that the connections are good and that the battery is in stable condition before beginning the charge process. Second, it initializes a recovery process, if needed, for deeply discharged or sulfated batteries by pulsing small amounts of current. Next, it begins a bulk-charging process with a gentle (soft) charge. The process then continues using max-rate, high-rate, medium-rate, and low-rate charges and returns 80 percent of the battery's capacity. From there, the G7200 brings the charge level to 100 percent and continues to deliver only enough current to keep the battery full. Finally, it monitors the battery voltage to determine whether a maintenance charge should be initiated. The maintenance cycle is repeated to keep the battery at full charge, without overcharging, and the charger can be left connected indefinitely. Switch-Mode Design with Advanced Features The NOCO G7200 features a high-frequency, high-efficiency switch-mode design, resulting in a charger that's compact and lightweight. An auto-memory function returns the charger to the last selected mode when you restart it. Thanks to NOCO's Rapid Charging Technology, the G7200 charges batteries two times faster than traditional linear battery chargers. With Abnormality Protection, the charger automatically shuts off if it's been left in bulk charge mode for an extended period of time. The charger is also designed to adjust automatically to changing current needs and prevent reverse polarity, short circuits, open circuits, sparks, overheating, over-currents, and overcharging. A 13.6V supply mode enables you to maximize battery capacity, revive low-voltage batteries, and use the charger as a power supply. Other modes let you charge in cold weather, charge AGM batteries, and recover deeply discharged or sulfated batteries with pulse charging. VosFX Processor for Smart Battery Charging The NOCO G7200 comes equipped with a VosFX smart processor that alters the charge process based on organic feedback fr[6718] This is a smart, 12 Step, fully automatic switch-mode battery charger and maintainer. It restores batteries to their original capacity, recovers slightly sulfated batteries, charges batteries in cold climates, rescues drained batteries, and provides maintenance charging to increase battery life. A powerful battery charger with specialized charging modes for recovering severely drained batteries. Suitable for most 12 volt and 24 volt battery capacities from 14-230Ah, such as motorcycles, ATVs, UTVs, snowmobiles, cars, RVs, boats and trucks. These battery chargers are fortified with several unique safety features to protect you, your battery and the battery charger. The VosFX processor is a revolutionary smart processor utilizing sophisticated levels of intelligence to alter the charge process based on organic feedback from the battery to extend battery life. The processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery. Rugged enclosure is made from a rugged polymer for high-impact resistance for some of the harshest and most demanding working environments. Features a fully insulated over-mold casing with strain relief ends to alleviate unwanted tension on cable leads. Each battery connection accessory features an over-molded inline fuse to increase user safety by protecting the battery charger from potentially dangerous short circuits. An interchangeable connector allows accessories to be properly mated and fastened with a snap-lock latch. Returns to last selected mode when restarted. Automatically adjusts itself to changing current needs. 100 per cent full charge even with varying A/C input voltages. The box includes a charger, battery clamp connectors, eyelet terminal connectors, owner's manual and user guide, product registration card.
Shipping Weight: 3.4 pounds
|
(
) 
