Product Description
Single Gauge CO2 Regulator: Kitchen & Dining. Specs: 3/8 inch Outside Diameter. Tells you the pressure to the keg so you can adjust accordingly for the type of beer you are drinking. Nonadjustable shut down inch blows off at 55-65 psi. Has an air shut off switch. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: CO2 distribution to one keg at a time. 0-60 gauge measure pressure to each keg. Has air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled Polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. . . 0-60 PSI.
Shipping Weight: 5 pounds
| 
(
) 
